As long as the spring bars on your # BLU67FR are in good shape there shouldn't be a need to replace them. If they are significantly worn, bent, or damaged then I would replace them along with the L-Bracket Plates # BLU42QR. The correct spring bars for your system are the # BLU25FR. For the L-Brackets with the mounts you need the # BLU72QR. view full answer...
I recommend something like the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275 which mounts to the tongue of your trailer and can support up to 100lbs.
This way this will avoid the spare tire on the rear of your trailer, and this rack will go over your propane tanks and attach to the frame of the trailer.
Alternatively, you can install a hitch to the rear of your trailer with # 13703 and a hitch extender like # BX88264 to push a bike rack out... view full answer...
For your 2021 Forest River Surveyor Legen 240BHLE the best weight distribution with sway control is the Reese Strait Line part # RP66083 which has a tongue weight range of 400-800 lbs and features the only sway control that works to fight sway before it starts. view full answer...
To measure for fit of the Lippert SolidStep, measure the entry way from right to left at the narrowest point. Generally there will be a flat metal flange that extends out 1/2" all around. This is the flange that the door closes against and keeps the door from trying to swing inside. From that measurement, round up to the next even inch.
So, your door (at the narrowest point) is 21-1/4" wide to the door flange, and rounded up we get 23". The narrowest width for solid steps is 24 inches.... view full answer...
We have the Camco RV Fresh Water Backflow Preventer part # CAM23402 which is the correct size you are looking for of 3/4 inch. Near the pump would be just fine. view full answer...
The closest thing we have to the dimensions you provided is the LaSalle Bristol Single Bowl RV Bathroom Sink # 34416166PW. When we measured this we found it was 16" long x 12-1/4" wide. LaSalle actually lists it as 15-3/4" x 12-3/8".
The part number is 16166PW which corresponds with the 166 series you referenced. The sink doesn't have to be an exact size match to work since it has a drop-in mount design. Worst case scenario you would need to slightly enlarge your current opening for the... view full answer...
Hi Brandon; the difference is the PD1610 is a 1,000 watt inverter, while the # PD64FR is a 2,000 watt inverter. You mentioned the PD1610 was a 2,000 watt inverter though I did verify that is inaccurate and it is a 1,000 watt inverter. view full answer...
The weather strip does not need to be removed prior to the installation of the # MR38RR. As long as you have the required gap of at least 3/8" between the threshold and the bottom of the door it is unlikely the weather strip will cause a problem. If you find that the door is not closing properly following installation you made need to trim it slightly for a better fit. view full answer...
For your 2020 Forest River Surveyor Legend Travel Trailer I recommend Adco SFS AquaShed Cover for Travel Trailer - Up to 24' Long - Gray # 290-52242.
This cover will give you 6 inches of clearance length-wise and 11 inches width-wise.
I've attached a video offering additional information for you. view full answer...
Hi Fred,
To find the right weight distribution hitch (WDH) for your trailer you'll want to fully load the trailer and truck bed like you were going camping and then measure the tongue weight. Each WDH will have a tongue weight capacity range and you'll want to be as close to the middle of it as possible. If you don't have access to a scale then the general rule of thumb is that your tongue weight is about 10-15% of your GVWR. A 2023 Forest River Surveyor Legend Travel Trailer 202RBLE has... view full answer...
If the owner's manual states a weight distribution system cannot be used then we cannot recommend using one. That said, we do still have options that can take ones place such as the Firestone Coil-Rite Air Helper Springs part # F4175 which like a weight distribution system will transfer the weight from the rear of the car to the front. If the trailer has brakes you can use the Tuson Asymmetric Sway Control part # 335TSC-1000 for sway control but this is about your only option for sway and... view full answer...
What you described is perfectly okay. Trailer tires are designed to be inflated to their max psi when cold and any pressure change that occurs from driving as long as the speed and weigh ratings aren't exceeded is perfectly normal. Also the changes you mentioned are very common. view full answer...
The specs I'm seeing for the 2015 Starcraft AR One Maxx 19BH LE show it being 22.17' in length so I recommend the Adco Polypropylene Storage Lot RV Cover for Travel Trailer - Up To 24' Long - Tan Item # 290-74842. This storage lot cover works best for long-term storage in all climates. The heavy-duty, 4-layer fabric protects against UV rays, dirt, wind, and snow. The slip-seam strap system ensures snug fit and prevents damage from high winds and secures with cam buckles. As you can see... view full answer...
Based on the information you provided you will need 2 sets of the SumoSprings Trailer Helper Springs # TSS-107-40 for your 2022 Forest River Surveyor Legend 202RBLE travel trailer. These springs are compatible with axles from 3,000-5,000lbs. Your Surveyor has two 3,500lb axles positioned in an over slung position with the axle below the leaf springs. view full answer...
Best option would be a multi fit hitch like the Curt # 13703 which would attach to the travel trailer frame. This basically fits all frame styles as long as the frame is between 22 and 72 inches apart. I highly recommend going with a non-folding carrier for the best overall stability since travel trailers are a bit rougher than vehicles with the 24x60 Curt Cargo Carrier for 2" Hitches # C18152. This has a 500 lb capacity and the Curt mentioned has a 350 lb tongue weight capacity. view full answer...
Hi Mimi,
Manufacturers unfortunately do not list the parts they use so I'll need to get a bit more information on the lights you have in order to find a replacement. If you want to send me some pictures of lights along with the measurements of them I can look for a replacement. view full answer...
It is possible that the wires are already ran and you won't have to worry about running wire, it's worth looking into before committing to running wires; the best way to obtain this information is to get your VIN number, and contact the trailer manufacturer.
If it turns out that your trailer isn't pre-rigged, then you can use a 12v power source like a battery, and run a black wire for your power and a white wire for your ground to your MaxxFan Deluxe # MA00-07500K. The black wire must... view full answer...
If you're looking for replacement frame brackets for an Equal-i-zer Weight Distribution System then we have just what you need in the Replacement Sway-Control Bracket for Equal-i-zer Weight Distribution part # EQ95-01-5600. We also carry the spring bars as well as the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems part # EQ90-01-1099. view full answer...
There is not really a functional difference between the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera # FR87PR and the no longer available FR74FR.
The only difference is that # FR87PR will work with 2021 and up model year vehicles, while FR74FR will not. The Furrion RV Observation Camera # FR87PR replaced the older FR74FR adapter as there wasn't a need for the older one especially since it won't work with 2021 year trucks. view full answer...